Fill bottle with desired contents.

Wipe threads of bottle and spray top with clean cloth to ensure the threads are dry and free from any liquid or dust.

Cut tube on spray top to proper length (approximately 1/16" above bottom of bottle). For best results, cut the tube at approximately a 45° angle.

Screw spray top securely onto bottle (clockwise).

If spray top becomes stiff, or hard to use, remove spray top from bottle, place the bottom of the tube in warm, soapy water, and spray the spray top a few times until the warm soapy water begins to spray through. Allow to sit for 5 minutes, then spray again with dip tube in warm, plain water to rinse out. Remove dip tube from water and continue spraying until spray top is empty.